News

Many materials of Chalco Aluminum require high hardness and deformation (to reduce brittleness).The most common applications are poor quality steel and normal steel used in construction, such as building houses and Bridges.Even if the pressure exceeds the designed weight, the good steel is the first deformation, then according to the deformation amount can be set dangerous house and bridge.And the use of inferior steel, overweight, it has no deformation, will suddenly break and collapse.And cause this kind of reason is because of the impurities contained in the steel, the most important influence steel this kind of impurity is carbon.


In the same way, the main reason for Aluminum bus tube supplier cracking is analyzed.If this batch of aluminum to force recommended not to use, if not the main conductive suggested later use 1 series of aluminum, high conductivity and good anti-corrosion
Suggestions for Chalco Aluminum  to prevent similar situations:
1. Improve the purity of materials and reduce the content of inclusions in the matrix of  Aluminum bus tube supplier materials.
2. Improve the composition design, heating and aging annealing process, and reduce the content of ferrite in the matrix of  Aluminum bus tube supplier material.
3. Increase the deformation path of the end, increase the deformation radius, reduce the deformation difficulty of the material, promote the uniform deformation of the material, and avoid excessive stress concentration.